Lab Chemicals

Dry Solvents

Dry (or "specially dried") solvents are ordinary solvents from which water has been reduced to a few hundred parts per million or less, usually by molecular sieves or distillation from a drying agent. Once dried, solvents are packed in sealed bottles, since a hygroscopic solvent like THF or DMF re-absorbs atmospheric water within minutes of opening. Molychem supplies dry solvents including THF, DMF, DMSO, acetonitrile, dichloromethane, chloroform, dioxan, toluene, methanol, IPA, cyclohexane and diethyl ether.

1 to 12 of 12 item(s) displayed

Swipe right to view more
Code Product Name CAS HSN Code Packing MSDS Specs COAs
42101 1,4 -DIOXAN SPECIALLY DRIED AR 123-91-1 29329900 500ML
MSDS Specs -
21065 ACETONITRILE 99.5% SPECIALLY DRIED AR 75-05-8 29269000 500ML
2.5LTR
- Specs -
41051 CHLOROFORM SPECIALLY DRIED AR 67-66-3 29031300 500ML
- Specs COAs
41091 DICHLOROMETHANE SPECIALLY DRIED AR 75-09-2 29031200 500ML
2.5LTR
MSDS Specs COAs
22985 DIETHYL ETHER SPECIALLY DRIED/AR 99% 60-29-7 29091100 500ML
- Specs COAs
42010 DIMETHYL FORMAMIDE SPECIALLY DRIED AR 68-12-2 29211110 500ML
MSDS Specs COAs
42061 DIMETHYL SULPHOXIDE SPECIALLY DRIED AR 67-68-5 29309099 500ML
MSDS Specs COAs
25182 iso-PROPYL ALCOHOL SPECIALLY DRIED/AR 99.7% 67-63-0 29051220 500ML
- Specs COAs
24265 METHANOL (SPECIALLY DRIED) AR (End use certificate required) 67-56-1 29051100 500ML
1LTR
2.5LTR
MSDS Specs COAs
26480 TETRAHYDROFURAN AR STABILISED SPECIALLY DRIED 109-99-9 29321100 500ML
2.5LTR
MSDS Specs COAs
42500 TOLUENE SPECIALLY DRIED 108-88-3 29023000 500ML
MSDS Specs COAs
22831 CYCLOHEXANE 99.5% SPECIALLY DRIED AR 110-82-7 29021100 500ML
MSDS Specs -

Note:

  1. Please send all your orders for bulk packs directly by email to info@molychem.net
  2. Prices are subjected to change without prior notice

Frequently Asked Questions

Dry or anhydrous solvents are dried to a low, specified water content for moisture-sensitive chemistry. Molychem supplies 12 specially dried AR solvents, including Tetrahydrofuran, Dichloromethane, Dimethylformamide and Acetonitrile 99.5%.

Organometallic reagents, Grignard reactions, acid chlorides, anhydrides and many metal catalysts are destroyed by trace water, so even the residual moisture in ordinary AR solvent can quench the reaction or suppress yield. Karl Fischer titration and moisture-sensitive analytical methods need dried solvent for the same reason.

Withdraw under inert gas by syringe through the septum rather than pouring, since opening the bottle to air reintroduces moisture within minutes. Never return unused solvent to the bottle. Once a bottle has been opened repeatedly, its water content should be reconfirmed before critical work.

THF AR Stabilised Specially Dried carries an inhibitor because THF forms explosive peroxides on exposure to air and light — a risk that drying alone does not remove. It must be stored sealed, away from light, and peroxide-tested before distillation or long storage.

Each batch ships with a Certificate of Analysis stating actual water content alongside assay, plus MSDS and specification sheet. Specially Dried Methanol AR requires an End Use Certificate with the order. Standard grades are listed under high purity solvents.

Diethyl Ether Specially Dried AR 99% and Specially Dried THF are the standard Grignard solvents, since both coordinate to magnesium and stabilise the reagent. THF is preferred for less reactive halides because of its higher boiling point, ether where a lower boiling point aids workup.